top of page
At FiberSprung, we believe in sustainability. To ensure lean efficiency and less waste, we'd love to help you digitally measure your floor.
Contact FiberSprung for us to mail you a Moasure device and schedule a measurement time. The Moasure is a measurement device which uses motion sensors such as gyroscopes and accelerometers to output your floor measurement to an app. Using the app, you can then send a CAD file to FiberSprung for our architects and designers to plan your floor.
With our help, this measurement process takes approximately 20-30 minutes, including installing the app. We will include a return shipping label with the device to return it to us.
STEP 1: Download the Moasure app from the App Store.
STEP 2: Log In to the FiberSprung account on Moasure
(this does not save any info to our account, it just prevents you from needing to make your own account)
STEP 3: Match your Moasure settings to the images below
(Connect the Moasure device to your phone via Bluetooth, and follow the prompts to reach these settings screens)
STEP 4: Select a measurement type
Select "Closed Shape" to measure a standard entire floor.
Select "Open Shape" to measure a floor, plus any central floor features such as columns.
(set up a measurement time with FiberSprung if you have any questions)
STEP 5: Follow the Moasure instructions to measure your floor. (see critical note below)
Measuring your floor with a Moasure is as easy as starting in one corner, and walking the perimeter of your floor, stopping every 6-8 seconds for the Moasure to take a measurement, and wherever there is a corner in the floor which must be measured.
CRITICAL: In settings (bottom of screen), select "Medium" for "Square Up" sensitivity.
STEP 6: Export your measurement to CAD as a DXF or DWG file.
Send the CAD file to info@fibersprung.com
STEP 7: Moasure measurements are good but not perfect. We request you measure your floor with the Moasure 2-3 times, and also measure your floor once, with a tape measure and draw it on a sheet of paper, to corroborate the Moasure measurements. Once you learn the device, each subsequent measurement should only take a couple of minutes.
for further assistance, contact:
Chase +1 401-330-0461
Micah +1 401-855-5520
bottom of page